manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 69 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 69

• Airbags may not inflate in rear colli-

sions, because occupants are
moved backward by the force of the
impact. In this case, the airbags do
not provide proper protection.

• Front airbags may not inflate in side

impact collision, because occu-
pants move to the direction of the
collision, and thus front airbag
deployment does not provide prop-
er protection.
However, curtain airbags may
inflate depending on the intensity,
vehicle speed and angles of
impact.

• In a slant impact or collision, The

force delivered will be relatively
weaker than that of frontal or side
collision. So, the airbags may not
inflate.

KNOWING YOUR VEHICLE

3-60

1BLA233

1BLA231

1BLA234

BL-ENG (CAN)-3.qxd  7/28/05  5:52 PM  Page 60

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments