manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 60 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 60

• The "PASSENGER AIRBAG OFF"

indicator illuminates after the igni-
tion key is turned to the "ON" posi-
tion or after the engine is started. If
the front passenger seat is unoccu-
pied or is occupied by very small
person, or is occupied by someone
who is improperly seated, the
"PASSENGER AIRBAG OFF" indi-
cator will remain illuminated. If the
front passenger seat is occupied by
someone of adult size and body
shape, the "PASSENGER AIRBAG
OFF" indicator will turn off after 6
seconds.

• If the "PASSENGER AIRBAG OFF"

indicator illuminates, the front pas-
senger airbag will not deploy in
either a side or frontal collision.

• If the "PASSENGER AIRBAG OFF"

indicator is not illuminated, the front
passenger airbag may deploy in
frontal collision.

KNOWING YOUR VEHICLE

3-51

CAUTION

If the "PASSENGER AIRBAG OFF" indicator illuminates or blinks con-
tinuously when a person of adult size sits in the front passenger's
seat , it could be because that person isn't sitting properly in the
seat.If this happens, turn the vehicle off, make sure the seat back is
not reclined, have the passenger center on the seat cushion, with legs
comfortably extended, and the safety belt properly positioned. Restart
the vehicle and have the person remain in this position long enough
to allow the system to detect the person and activate the passenger
airbag.

Condition and operation in the front passenger occupant 
classification system

Condition detected by

the occupant classifi-

cation system

1. Adult *

1

2. Child*

2

or child

restraint system

3. Unoccupied 

Off

On

On

Off

Off

Off

Activated

Deactivated

Deactivated

"PASSENGER AIRBAG

OFF" indicator light

SRS warning light

Front passenger front

airbag and front 

passenger side airbag

Indicator/Warning light

Devices

*

1

The system detects a person who is generally adult size as an adult, thus allowing the pas-

senger airbag to deploy. When a smaller adult sits in the front passenger seat, the system may
detect their body shape as that of a child, thus preventing airbag deployment.

*

2

When a larger child who has outgrown a child restraint system sits in the front passenger seat,

the system may recognize him/her as an adult depending on his/her body shape or seating
position, thus permitting airbag deployment.

BL-ENG (CAN)-3.qxd  7/28/05  5:52 PM  Page 51

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments