manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 48 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 48

2. Fasten the lap/shoulder belt latch

into the buckle. Listen for the dis-
tinct “click” sound.

Position the release button so that it
is easy to access in case of an emer-
gency.

3. Pull the shoulder portion of the

safety belt all the way out. When
the shoulder portion of the safety
belt is fully extended, it will shift the
retractor to the “Auto Lock” (child
restraint) mode.

4. Slowly allow the belt to retract. Pull

up on the shoulder webbing. A
“clicking” or “ratcheting” sound will
be heard as the belt retracts. This
indicates the retractor is now in the
automatic locking mode. Push
down on the child restraint while
you pull up on the belt in order to
remove any slack in the belt.

KNOWING YOUR VEHICLE

3-39

S2BLD301

S2BLD310

"Click"

S2BLD302

BL-ENG (CAN)-3.qxd  7/28/05  5:52 PM  Page 39

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments