manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 39 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 39

Type B

As a reminder to the driver and pas-
senger, safety belt warning light will
blink for approximately 6 seconds
each time you turn the ignition switch
ON regardless of belt fastening.
If the driver's safety belt is unfastened
after the ignition switch is ON, the
safety belt warning light will blink for
approximately 6 seconds.
If the driver's safety belt is not fas-
tened when the ignition key is turned
ON, the safety belt warning chime will
sound for approximately 6 seconds.

Front and Rear Outboard
Lap/Shoulder Belt

To fasten the lap/shoulder belt:

1. Grasp the buckle and tongue plate.
2. Slowly pull the lap/shoulder belt

out from the retractor.

3. Insert the tongue plate into the

open end of the buckle until an
audible  “click” is heard, indicating
the belt is locked in the buckle.

KNOWING YOUR VEHICLE

3-30

S2BLA371

S2BLA372

BL-ENG (CAN)-3.qxd  7/28/05  5:52 PM  Page 30

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments