manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 306 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 306

SPECIFICATIONS

The specifications given here are for general information
only. Please check with an authorized Kia dealer for
more precise and more up-to-date information.

SPECIFICATIONS

8-2

Item

mm (in)

Overall length w/o bumper guard

4,567 (179.8)

Overall length with bumper guard

4,625 (182.1)

Overall width w/o wide garnish

1,863 (73.3)

Overall width with wide garnish 

1,884 (74.2)

Overall height w/o roof rack

1,730 (68.1)

Overall height with roof rack

1,810 (71.3)

Front tread

1,580 (62.2)

Rear tread

1,580 (62.2)

Wheelbase

2,710 (106.7)

Dimensions

Weights

Refer to the compliance label describing GVWR &
GAWR weights attached to your vehicle.
(see page 5-44, Label information)

BL-ENG (CAN)-8.qxd  7/28/05  5:59 PM  Page 2

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments