Kia Sorento 2006 Owner'S Manual Download Page 303

Page: 303 / 312

Aluminum Wheel Maintenance

The aluminum wheels are coated
with a clear protective finish.
• Do not use any abrasive cleaner,

polishing compound, solvent, or
wire brushes on aluminum wheels.
They may scratch or

damage the finish.
• Use only a mild soap or neutral

detergent, and rinse thoroughly
with water. Also, be sure to clean
the wheels after driving on salted
roads. This helps prevent corrosion.

• Avoid washing the wheels with

high-speed car wash brushes.

• Do not use any acid detergent It

may damage and corrode the alu-
minum wheels coated with a clear
protective finish.

MAINTENANCE

7-46

CAUTION

After washing the vehicle, test
the brakes while driving slowly
to see if they have been affected
by water.

BL-ENG (CAN)-7.qxd 7/28/05 5:58 PM Page 46

Summary of Contents for Sorento 2006

























































































































































































































































































































Search results

Summary of Contents for Sorento 2006

Reviews:

Kia Sorento 2006, Owner'S Manual, Page: 303 / 312

Search results

Summary of Contents for Sorento 2006

Reviews: