manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 282 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 282

MAINTENANCE

7-25

(Continued)
• Disconnect the battery charg-

er in the following order.
1. Turn off the battery charger

main switch.

2. Unhook the negative clamp

from the negative battery
terminal.

3. Unhook the positive clamp

from the positive battery
terminal.

✽

✽

NOTICE

• Before performing maintenance

or recharging the battery, turn
off all accessories and stop the
engine.

• The negative battery cable must

be removed first and installed last
when the battery is disconnected.

WARNING 

- Recharging Battery

When recharging the battery,
observe the following precau-
tions:
• The battery must be removed

from the vehicle and placed in
an area with good ventilation.

• Do not allow cigarettes,

sparks, or flame near the bat-
tery.

• Watch the battery during

charging, and stop or reduce
the charging rate if the battery
cells begin gassing (boiling)
violently or if the temperature
of the electrolyte of any cell
exceeds 120°F (49°C).

• Wear eye protection when

checking the battery during
charging.

(Continued)

BL-ENG (CAN)-7.qxd  7/28/05  5:58 PM  Page 25

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments