manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 266 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 266

ENGINE OIL AND OIL
FILTER

Checking the Engine Oil Level

1. Be sure the vehicle is on level

ground.

2. Start the engine and allow it to

reach normal operating tempera-
ture.

3. Turn the engine off and wait a few

minutes for the oil to return to the
oil pan.

4. Pull the dipstick out, wipe it clean,

and re-insert it fully.

5. Pull the dipstick out again and

check the level. The level should be
between F and L.

If the level is near or at L, add enough
oil to bring the level to F.

Do not over-

fill.

Use only the specified engine oil.
(Refer to “Recommended Lubricants’’
later in this section.)

Changing the Engine Oil and
Filter

Change engine oil and filter accord-
ing to the Scheduled Maintenance at
the beginning of this section.

MAINTENANCE

7-9

OK

F

L 

S2BLC705A

WARNING

- Engine Oil

Continuous contact with USED
engine oil has caused skin can-
cer in laboratory mice. Protect
your skin by washing with soap
and water. Keep all engine oil
out of reach of children.

BL-ENG (CAN)-7.qxd  7/28/05  5:58 PM  Page 9

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments