manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 26 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 26

Adjusting the Front Seatback
Recliner

Rotate the upper portion of the con-
trol knob forward or backward to
recline the seatback to the desired
position. Release the control knob
and the seatback will lock in position.

Adjusting the Height of Front Seat
Cushion

Front height of front seat cushion

Move the front portion of the control
knob up to raise or down to lower the
front part of the seat cushion.

KNOWING YOUR VEHICLE

3-17

S2BLA340C

S2BLA340B

✽

✽

NOTICE

Prior to operating the vehicle,
ensure the seat is locked securely by
trying to move the seat forward or
backward without using the control
knob. If the seat moves, it is not
locked properly.

BL-ENG (CAN)-3.qxd  7/28/05  5:52 PM  Page 17

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments