manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 250 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 250

• Press the brake pedal with more

force than normal since you will
have reduced brake performance.

• More steering effort will be required

because the power steering system
will be disabled.

• If you are driving down a long hill,

the brakes may overheat and brake
performance will be reduced. Stop
often and let the brakes cool off.

Tips for towing a stuck vehicle

The following methods are effective
when your vehicle is stuck in mud,
sand or similar substances that pre-
vent the vehicle from being driven out
under its own power.
• Remove the soil and sand, etc.

from the front and the back of the
tires.

• Place a stone or wood under the

tires.

IN CASE OF AN EMERGENCY

6-18

✽

✽

NOTICE

To prevent internal damage to the
transmission, never tow your vehi-
cle from the rear (backwards) with
all four tires in contact with the sur-
face.  

BL-ENG (CAN)-6.qxd  7/28/05  5:57 PM  Page 18

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments