manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 234 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 234

ROAD WARNING

Hazard Warning Flasher

The hazard warning flasher serves
as a warning to other drivers to exer-
cise extreme caution when approach-
ing, overtaking, or passing your vehi-
cle. It should be used whenever
emergency repairs are being made,
when the vehicle is stopped near the
edge of a roadway, or whenever your
vehicle is in distress.

Depress the flasher switch to activate
at any time. The flasher switch is
located in the center console switch
panel. All turn signal lights will flash
simultaneously.
• The hazard warning flasher oper-

ates whether your vehicle is run-
ning or not.

• The turn signals do not work when

the hazard flasher is on.

• Care must be taken when the haz-

ard warning flasher is used while
the vehicle is being towed. Local
regulations may prohibit using it in
this manner.

IN CASE OF AN EMERGENCY

6-2

AUTO

AUTO AMB

OFF

TEMP

MODE

AMB

A/C

A/C

L

R

H
M

PASSENGER AIRBAG OFF

5BLC601A

BL-ENG (CAN)-6.qxd  7/28/05  5:57 PM  Page 2

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments