manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 230 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 230

OVERLOADING

LABEL INFORMATION

There are several important labels
and identification numbers located on
your vehicle. The label locations are
identified in the illustrations on the fol-
lowing three pages.

Vehicle Identification Number
(VIN)

This is the legal identifier for your
vehicle. It appears on a plate
attached to the left side of the forward
portion of the dashboard. The VIN
plate can be easily seen from the out-
side of the vehicle through the wind-
shield on the driver’s side.

DRIVING TIPS

5-43

S2BLD304

WARNING

- Weight Rating

The gross axle weight rating
(GAWR) and the gross vehicle
weight rating (GVWR) for your
vehicle are on the manufactur-
er’s label attached to the dri-
ver’s door. Exceeding these rat-
ings can cause an accident or
vehicle damage. You can calcu-
late the weight of your load by
weighing the items (or people)
before putting them in the vehi-
cle. Be careful not to overload
your vehicle.

BL-ENG (CAN)-5.qxd  7/28/05  5:56 PM  Page 43

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments