manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 195 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 195

SPECIAL DRIVING
CONDITIONS

Hazardous Driving Conditions

When hazardous driving conditions
are encountered such as water,
snow, ice, mud, sand, or similar haz-
ards, follow these suggestions:
• Drive cautiously and allow extra

distance for braking.

• Avoid sudden movements in brak-

ing or steering.

• When braking in the four-wheel

drive mode (if equipped), pump the
brake pedal with a light up-and-
down motion until the vehicle is
stopped.

• If stalled in snow, mud, or sand, use

second gear or shift the transfer
case (if equipped) into four-wheel
drive. Accelerate slowly to avoid
spinning the drive wheels.

• Use sand, rock salt, tire chains, or

other non-slip material under the
drive wheels to provide traction
when stalled in ice, snow, or mud.
(If equipped, refer to “Using Four-
Wheel Drive.’’)

DRIVING TIPS

5-8

✽

✽

NOTICE

Do not pump the brake pedal on
ABS equipped vehicle.

WARNING 

- Downshifting

On slippery surfaces, down-
shifting can cause an accident.
The sudden change in tire
speed could cause the tires to
skid. Be careful when down-
shifting on slippery surfaces.
Try to drive slowly enough so
you won’t have to make any
sudden changes in gear or vehi-
cle speed.

BL-ENG (CAN)-5.qxd  7/28/05  5:56 PM  Page 8

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments