manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 180 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 180

Fan Speed Control 
Button

The fan speed can be set to the
desired speed by pressing the appro-
priate fan speed control button.
The higher the fan speed is, the more
air is delivered.
Pressing the “OFF” button turns off
the fan.

- Fan off
- Low speed
- Medium speed
- High speed
- Maximum speed   

Air Flow Control Button  

This is used to select outside (fresh)
air position or recirculated air posi-
tion.
To change the air intake control posi-
tion, push the control button.

Recirculated air position

The indicator light is illuminated when
the air intake control is in recirculated
air position.
With the recirculated air position
selected, air from passenger com-
partment will be drawn through the
heating system and heated or cooled
according to the function selected.

Outside (fresh) air posi-
tion

The indicator light on the button is
illuminated when the air intake con-
trol is set to the outside (fresh) air
position.
With the outside (fresh) air position
selected, air enters the vehicle from
outside and is heated or cooled
according to the function selected.
The system will automatically switch
to the outside (fresh) air position
whenever the ignition is turned ON.

To cancel the automatic outside
(fresh) air selection, refer to the can-
cel procedure in the windshield
defrosting and defogging section.

DRIVING YOUR VEHICLE

4-82

BL-ENG (CAN)-4.qxd  7/28/05  5:56 PM  Page 82

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments