manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 179 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 179

Manual Operation  

The heating and cooling system can
be controlled manually as well by
pushing buttons other than the AUTO
button. In this case, the system
sequentially works according the
order of buttons selected.
The functions of the buttons which
are not selected will be controlled
automatically.
Press the AUTO button in order to
convert to automatic control of the
system.

Temperature Control
Button

The temperature will increase to the
maximum HI (32°C/90°F) by pushing
the up button. Each push of the but-
ton will cause the temperature to
increase by 0.5 °C (1°F).
The temperature will decrease to the
minimum LO (17°C/62°F) by pushing
the down button. Each push of the
button will cause the temperature to
decrease by 0.5°C (1°F).

Ambient Button 

The ambient temperature will be dis-
played for 5 seconds. before return-
ing to the previous indication.
If you press AMB button again, the
previous indication will be displayed.

DRIVING YOUR VEHICLE

4-81

TEMP

AMB

BL-ENG (CAN)-4.qxd  7/28/05  5:55 PM  Page 81

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments