manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 166 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 166

Ashtrays

Front ashtray

To use the ashtray, press the front
face and release it to allow the ciga-
rette lighter and ashtray to slowly
extend from center panel.
To remove the ashtray, grasp the ash-
tray bucket and carefully pull it out.

DRIVING YOUR VEHICLE

4-68

H
M

5BLA335B

✽

✽

NOTICE

• Do not hold the lighter in after it

is already heated because it will
overheat.

• Only a genuine Kia lighter or

equivalent should be used in the
cigarette lighter socket. The use
of plug-in accessories (shavers,
hand-held vacuums, and coffee
pots, for example) may damage
the socket or cause electrical fail-
ure.

• If the lighter does not pop out

within 30 seconds, remove it to
prevent overheating.

WARNING

-Ashtray Use

• Do not use the vehicle’s ash-

trays as waste receptacles.

• Putting lit cigarettes or match-

es in an ashtray with other
combustible materials may
cause a fire.

BL-ENG (CAN)-4.qxd  7/28/05  5:55 PM  Page 68

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments