manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 160 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 160

WIPERS AND WASHERS

Windshield Wipers

The ignition switch must be ON.
To turn the wipers on, move the lever
down.

- One touch wiper

INT  - Intermittent wiper operation
LO   - Normal wiper speed
HI    - Fast wiper speed   

Variable Intermittent Wipers

Set the lever to the INT position and
choose the desired wiper interval by
turning the ring.

One-Touch Wipers

For a single wiping cycle, push the
lever upward and release it with the
lever in the OFF position.
The wipers will operate continuously
if the lever is pushed upward and
held.

DRIVING YOUR VEHICLE

4-62

HI

LO

ON

INT

INT

OFF

OFF

F

S

REAR

INT

TIME

PULL

S2BLA445

OFF

INT

LO

HI

HI

LO

ON

REA

R

INT

INT

OFF

OFF

F

S

INT

TIME

PULL

S2BLA442A

HI

LO

ON

INT

INT

OFF

OFF

F

S

REAR

INT

TIME

PULL

S2BLA446

BL-ENG (CAN)-4.qxd  7/28/05  5:55 PM  Page 62

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments