manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 159 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 159

Front Fog Light (If equipped)  

To turn the front fog lights ON, turn
the headlights ON after starting the
engine and then turn the front fog
light switch to ON position. To turn it
OFF, turn it to OFF position or turn
the headlights OFF.

Daytime Running Light 

Daytime Running  Lights (DRL) can
make it easier for others to see the
front of your vehicle during the day.
DRL can be helpful in many different
driving conditions, and it is especially
helpful after dawn and before sunset.
The DRL system will make your high-
beam headlights turn OFF when:
• The headlight switch is ON.
• The parking brake is engaged.
• The engine stops.

DRIVING YOUR VEHICLE

4-61

AUTO

OFF

OFF

ON

S2BLA440

BL-ENG (CAN)-4.qxd  7/28/05  5:55 PM  Page 61

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments