manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 151 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 151

Electric Azimuth Compass

It displays azimuth according to the
vehicle’s driving direction.
The indication is displayed only when
the vehicle is in motion.

Correcting Azimuth Indicator 

Position correction should be per-
formed if the displayed direction of
the vehicle differs from the actual
direction of the vehicle, or if the bat-
tery has been disconnected.

1. Start the vehicle and access the

compass function indicated by
DRT on the display.

Press the

MODE/SET button until the DRT
display begins to blink on and off.

2. Slowly (about 3 mph) and carefully

drive the vehicle in a complete 360
degree circle, within 128 seconds
(about two minutes).

3. After completing the circle drive,

the DRT display will stop blinking
and the error correction will be
complete.

DRIVING YOUR VEHICLE

4-53

DRT

ALTI

BARO

E

hpa

m

ft

PUSH

MODE

/SET

UP

DOWN

DRT

S2BLA431

✽

✽

NOTICE

If new vehicle is first driven or if the
battery has been disconnected, cor-
rect the azimuth indicator before
driving.

BL-ENG (CAN)-4.qxd  7/28/05  5:55 PM  Page 53

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments