manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 150 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 150

MULTI-METER 
(IF EQUIPPED)

The Functions Of Multi-Meter

1. Azimuth Compass
2. Relative Altimeter
3. Barometer
4. Tempmeter (if equipped)

How to Adjust the Multi-Meter

Switch function

Mode/Set Switch Function

1. Selection of modes : If you push

the MODE/SET switch for less
than 1 second, the mode will be
selected as follows.

2. Correction of Relative Azimuth

Compass Indicator.

3. Correction of Terrestrial deviation

of the Azimuth Compass.

4. Clear the altitude to “0” (zero).

Up/Down Switch

1. Correction of the terrestrial devia-

tion angle of the Azimuth
Compass.

2. Conversion of the Relative

Altimeter. units (m 

⇔

ft).

3. Conversion of the Tempmeter units

(°C 

⇔

°F).

DRIVING YOUR VEHICLE

4-52

DRT

ALTI

BARO

E

hpa

m

ft

PUSH

MODE

/SET

UP

DOWN

S2BLA430A

Azimuth Compass 

↓

Relative Altimeter 

↓

Barometer 

↓

Tempmeter (if equipped)

BL-ENG (CAN)-4.qxd  7/28/05  5:55 PM  Page 52

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments