manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 141 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 141

GAUGES

Speedometer

The speedometer indicates the for-
ward speed of the vehicle.

Odometer/Tripmeter

You can choose the odometer, trip-
meter A and tripmeter B by pressing
the mode selection button.

Odometer

The odometer indicates the total dis-
tance the vehicle has been driven.

Tripmeter 

TRIP A : Tripmeter A
TRIP B : Tripmeter B
The tripmeter indicates the distance
of individual trips selected by the driv-
er. Tripmeter A and B can be reset to
zero by pressing the mode selection
button for one second or more then
releasing.

Engine Temperature  Gauge

This gauge shows the temperature of
the engine coolant when the ignition
switch is ON.
If the gauge pointer moves beyond
the normal range area toward the H
position, it indicates overheating that
may damage the engine.
Do not continue driving with an over-
heated engine. If your vehicle over-
heats, refer to “Overheating’’ in the
Index.

Fuel Gauge

The fuel gauge indicates the approx-
imate amount of fuel remaining in the
fuel tank.
Fuel tank capacity - 20.8 gal. (80
liters).
The fuel gauge is supplemented by a
low fuel warning light, which will illu-
minate when the fuel level has
dropped to about 3.1 gal. (12 liters).

DRIVING YOUR VEHICLE

4-43

F

E

S2BLA428

H

C

S2BLA427

BL-ENG (CAN)-4.qxd  7/28/05  5:55 PM  Page 43

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments