manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 136 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 136

CRUISE CONTROL

The cruise control system allows you
to program the vehicle to maintain a
constant speed without resting your
foot on the accelerator pedal.
With cruise control, you can set and
automatically maintain any speed of
more than about 24 mph (40km/h).

To Set Cruise Control Speed:

1. Push the CRUISE switch, located

on the left side of the steering col-
umn, to the ON position.

2. Accelerate to the desired speed,

which must be more than 24 mph
(40 km/h).

3. Depress the COAST/SET switch,

located on the steering wheel, and
release it at the speed you want.
Release the accelerator at the
same time. The desired speed will
automatically be maintained and
the CRUISE light on your instru-
ment cluster will illuminate.

T

he SET function cannot be activated

until approximately 2 seconds after
the CRUISE MAIN switch has been
engaged.
On a steep grade, the vehicle may
momentarily slow down while going
downhill.

DRIVING YOUR VEHICLE

4-38

S R S

AIRBAG

RES

ACCEL

COAST

SET

PWR

SEEK

CANCEL

S2BLA421

LOW

AUTO

CRUiSE

S2BLA420

WARNING

- Cruise Control

Do not use the cruise control
feature under the following con-
ditions:
• Heavy or unsteady traffic
• Slippery or winding roads
• Situations that involve vary-

ing speeds

WARNING

If the CRUISE MAIN switch is
left on, the cruise control can be
switched on accidentally. Keep
the CRUISE MAIN switch off
when cruise control is not in
use.

BL-ENG (CAN)-4.qxd  7/28/05  5:55 PM  Page 38

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments