Kia Sorento 2006 Owner'S Manual Download Page 127

Page: 127 / 312

DRIVING YOUR VEHICLE

4-29

WARNING

• Avoid high cornering speed.
• Do not make quick steering

wheel movements, such as
sharp lane changes or fast,
sharp turns.

• The risk of rollover is greatly

increased if you lose control
of your vehicle at high
speeds.

• In a collision crash, an unbelt-

ed person is significantly
more likely to die compared to
a person wearing a seat belt.

• Loss of control often occurs if

two or more wheels drop off
the roadway and the driver
over steers to re-enter the
roadway.

• In the event your vehicle

leaves the roadway, do not
steer sharply.
Instead, slow down before
pulling back into the travel
lanes.

BL-ENG (CAN)-4.qxd 7/28/05 5:55 PM Page 29

Summary of Contents for Sorento 2006

























































































































































































































































































































Search results

Summary of Contents for Sorento 2006

Reviews:

Kia Sorento 2006, Owner'S Manual, Page: 127 / 312

Search results

Summary of Contents for Sorento 2006

Reviews: