manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 120 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 120

Full-Time 4WD Operation 
(If equipped)

When 4WD is selected with the trans-
fer shift knob, the vehicle will switch
to 4WD operation after a few sec-
onds.

To avoid shift shock, when the vehicle
is stopped and you make a transfer
case shift using the transfer shift
knob, wait until the corresponding
indicator light in the instrument clus-
ter illuminates before driving.

Knob position

This is used to set different positions.

AUTO

Full power delivered to front and rear
axle for increased traction. Use this
mode for normal on-road driving.
The 4WD LOW indicator light ( 

)

will be turned off after blinking for a
few seconds to remind you that you
are in the AUTO mode.

LOW 

Full power to both axles, including a
lower gear ratio for low speed appli-
cations that require extra power such
as wet pavement, snow-covered
roads and/or off-road.
LOW Mode is not recommended on
dry pavement.
The 4WD LOW indicator light ( 

)

will be turned on after blinking for a
few seconds to remind you that you
are in the LOW mode.

4WD
LOW

4WD
LOW

DRIVING YOUR VEHICLE

4-22

LOW

AUTO

S2BLA411B

✽

✽

NOTICE

When the vehicle shifts into 4WD
mode, a slight mechanical sound
and vibration may be felt and does
not indicate a problem with the sys-
tem.  

BL-ENG (CAN)-4.qxd  7/28/05  5:55 PM  Page 22

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments