manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 112 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 112

Moving Up a Steep Grade From a
Standing Start

To move up a steep grade from a
standing start, depress the brake
pedal, shift the shift lever to D (Drive),
2 (Second) or L (Low) depending on
load weight and steepness of the
grade, and release the parking brake.
Depress the accelerator gradually
while releasing the service brakes.

DRIVING YOUR VEHICLE

4-14

✽

✽

NOTICE

Do not exceed the recommended
maximum speeds in 2 (Second
Gear) or L (Low). Operating the
vehicle at speeds above the maxi-
mum recommended, for these gears
may cause excessive heat to develop
which could result in damage to or
failure of the automatic transmis-
sion.

BL-ENG (CAN)-4.qxd  7/28/05  5:55 PM  Page 14

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments