manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 107 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 107

DRIVING YOUR VEHICLE

4-9

P

R

N

D

2

L

O/D OFF

P

R

N

D

2

L

S2BLC402B

AUTOMATIC TRANSMISSION  (30-40LEi, IF EQUIPPED)

Normal transmission gear
ranges are provided on the
right side of the indicator.

Lock release button 

Prevents shift lever movement without
first depressing the button.

Shift pattern indicator
shows shift lever position and
gear range of the transmission.

To move the shift lever from the P position,
the ignition switch must be in the ON position,
the brake pedal must be depressed and the
lock release button must be depressed.

The lock release button must be depressed
while moving the shift lever.

The shift lever can be moved without depress-
ing the lock release button.

O/D System

Pressing the button de-acti-
vates the O/D mode. Pressing
again re-activates the O/D
mode.

Shift lever

BL-ENG (CAN)-4.qxd  7/28/05  5:55 PM  Page 9

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments