manualshive.com logo in svg

Kia Sorento 2006, Owner'S Manual, Page: 104 / 312

Share
Download
Kia Sorento 2006 Owner'S Manual Download Page 104

3. While depressing the accelerator

about halfway, turn the ignition
switch to the START position and
hold it (a maximum of 10 seconds).

4. Let the engine idle for about 10

seconds before driving.

The starter will not operate if:
• Manual transmission - the clutch

pedal is not fully depressed.

• Automatic transmission - the shift

lever is NOT in the P (Park) or N
(Neutral) position.

Excessive engine noise may occur if
the engine has not been operated for
an extended period. The noise should
stop after the engine has reached
normal operating temperature. If the
noise does not stop, have the vehicle
inspected by an authorized Kia deal-
er.

DRIVING YOUR VEHICLE

4-6

✽

✽

NOTICE

Do not engage the starter for more
than 10 seconds. If the engine stalls
or fails to start, wait 5 to 10 seconds
before re-engaging the starter.
Improper use of the starter may
damage it.

BL-ENG (CAN)-4.qxd  7/28/05  5:55 PM  Page 6

Summary of Contents for Sorento 2006

























































































































































































































































































































Reviews:

No comments