manualshive.com logo in svg

Kia SELTOS, Manual, Page: 277 / 280

Share
Download
Kia SELTOS Manual Download Page 277

35

5

5

Infotainment system

Infotainment system specifications

䳜 Maximum length of folder/file 

names (Based on Unicode): 40 
English or Korean characters

䳜 Supported characters for folder/

file names (Unicode support): 
2,604 Korean characters, 94 
alphanumeric characters, 4,888 
Chinese characters in common 
use, 986 special characters

䳜 Maximum number of folders: 

1,000

䳜 Maximum number of files: 5,000

NOTICE

䳜 Files that are not in a supported 

format may not be recognised or 
played, or information about 
them, such as the file name, may 
not be displayed properly.

䳜 Only files with .mp3/.wma/.wav 

extensions can be recognised by 
the system. If the file is not in 
supported format, change the file 
format by using the latest encod

-

ing software.

䳜 The device will not support files 

locked by DRM(Digital Rights 
Management).

䳜 For MP3/WMA compression files 

and WAV file, differences in sound 
quality will occur depending on 
the bitrate. (Music files with a 
higher bitrate have a better sound 
quality.)

䳜 Japanese or Simplified Chinese 

characters in folder or file names 
may not be displayed properly.

Supported USB storage devices

䳜 Byte/Sector: 64 kbyte or less
䳜 Format system: FAT12/16/32 

(recommended), exFAT/NTFS

NOTICE

䳜 Operation is guaranteed only for a 

metal cover type USB storage 
device with a plug type connector.
- USB storage devices with a 

plastic plug may not be rec

-

ognised.

- USB storage devices in memory 

card types, such as CF card or 
SD cards, may not be rec

-

ognised.

䳜 USB hard disk drives may not be 

recognised.

䳜 When you use a large capacity 

USB storage device with multiple 
logical drives, only files stored on 
the first drive will be recognised.

䳜 If an application program is loaded 

on a USB storage device, the cor

-

responding media files may not 
play.

䳜 Use USB 2.0 devices for better 

compatibility.

Bluetooth

䳜 Bluetooth Power Class 2: -6 to 4 

dBm

䳜 Aerial power: Max 3 mW
䳜 Frequency range: 2400 to 2483.5 

MHz

Summary of Contents for SELTOS

























































































































































































































































































Reviews:

No comments