Kia SELTOS Manual Download Page 249

Page: 249 / 280

Infotainment system

Audio (Without Touch Screen)

System layout 䳍 control panel

Type A

* The system䳓s actual appearance and layout may differ depending on the

vehicle model and specification.

1. RADIO button

䳜 Press to display the radio mode

selection window.

䳜 When the mode selection win

dow displays, turn the [

TUNE

]

knob to select the desired mode
and then press the knob.

䳜 When the Mode popup is not

selected in [

MENU/CLOCK

] ▶

Mode popup

, press the [

RADIO

]

button on the control panel to
change the mode.
Each time you press the
[

RADIO

] button on the control

panel, the mode switches to
radio FM ▶ AM in order.

2. MEDIA button

䳜 Play content from a media

storage device.

3. FAV button

䳜 Whilst listening to the radio,

press to move to next page of
the preset list.

4. POWER button/VOL knob

䳜 Press to turn the system on or

off.

䳜 Turn to the left or right to

adjust the system sound vol

ume.

5. SEEK/TRACK button

䳜 Change the station/track/file.
䳜 Whilst listening to the radio,

press and hold to search for a
station.

䳜 Whilst playing media, press and

hold to rewind or fast forward.

Summary of Contents for SELTOS

























































































































































































































































































Search results

Summary of Contents for SELTOS

Reviews:

Kia SELTOS, Manual, Page: 249 / 280

Search results

Summary of Contents for SELTOS

Reviews: