Kia SELTOS Manual Download Page 74

Page: 74 / 280

Safety features of your vehicle

Air bag - supplemental restraint system

Upon deployment, tear seams
molded directly into the pad covers
will separate under pressure from
the expansion of the air bags. Fur

ther opening of the covers then
allows full inflation of the air bags.

Driver's front air bag (3)

A fully inflated air bag, in combina

tion with a properly worn seat belt,
slows the driver's or the passenger's
forward motion, reducing the risk of
head and chest injury.

After complete inflation, the air bag
immediately starts deflating,
enabling the driver to maintain for

ward visibility and the ability to
steer or operate other controls.

Passenger's front air bag

ODEEV058050NR

ODEEV058051NR

Summary of Contents for SELTOS

























































































































































































































































































Search results

Summary of Contents for SELTOS

Reviews:

Kia SELTOS, Manual, Page: 74 / 280

Search results

Summary of Contents for SELTOS

Reviews: