Kia SELTOS Manual Download Page 34

Page: 34 / 280

Safety features of your vehicle

Seat

Reinstalling headrest

Type A

Type B

To reinstall the headrest:
1. Put the headrest poles (2) into

the holes whilst pressing the
release button (1).

2. Recline the seatback (4) with the

recline lever or switch (3).

3. Adjust the headrest to the appro

priate height.

WARNING

Always make sure the headrest
locks into position after reinstalling
and adjusting it properly.

Seatback pocket (if equipped)

The seatback pocket is provided on
the back of the front passenger's
seatback.

WARNING

Seatback pockets

Do not put heavy or sharp objects in
the seatback pockets. In an accident
they could come loose from the
pocket and injure vehicle occupants.

Rear seat adjustment

Folding the rear seat

The rear seatbacks can be folded to
facilitate carrying long items or to
increase the luggage capacity of the
vehicle.

WARNING

The purpose of the fold-down rear
seatbacks is to allow you to carry
longer objects that could not be
accommodated in the cargo area.

OSP2039013R

OSP2039014R

OSP2I039013

Summary of Contents for SELTOS

























































































































































































































































































Search results

Summary of Contents for SELTOS

Reviews:

Kia SELTOS, Manual, Page: 34 / 280

Search results

Summary of Contents for SELTOS

Reviews: