Kia SELTOS Manual Download Page 251

Page: 251 / 280

Infotainment system

Audio (Without Touch Screen)

* The system䳓s actual appearance and layout may differ depending on the

vehicle model and specification.

1. AUDIO button

䳜 Press to display the radio/

media mode selection window.

䳜 When the mode selection win

dow displays, turn the [

TUNE

]

knob to select the desired mode
and then press the knob.

䳜 When the Mode popup is not

selected in [

MENU/CLOCK

] ▶

Mode popup

, press the [

AUDIO

]

button on the control panel to
change the mode.
Each time you press the
[

AUDIO

] button on the control

panel, the mode switches to
radio ▶ media in order.

2. PHONE button

䳜 Press to start connecting a

mobile phone via Bluetooth.

䳜 After a Bluetooth phone con

nection is made, press to access
the Bluetooth phone menu.

3. FAV button

䳜 Whilst listening to the radio,

press to move to next page of
the preset list.

4. POWER button/VOL knob

䳜 Press to turn the system on or

off.

䳜 Turn to the left or right to

adjust the system sound vol

ume.

5. SEEK/TRACK button

䳜 Change the station/track/file.
䳜 Whilst listening to the radio,

press and hold to search for a
station.

䳜 Whilst playing media, press and

hold to rewind or fast forward
(except for Bluetooth audio
mode).

Type B

Type C

(With Bluetooth Wireless Technology)

Summary of Contents for SELTOS

























































































































































































































































































Search results

Summary of Contents for SELTOS

Reviews:

Kia SELTOS, Manual, Page: 251 / 280

Search results

Summary of Contents for SELTOS

Reviews: