manualshive.com logo in svg

Kia SELTOS, Manual, Page: 187 / 280

Share
Download
Kia SELTOS Manual Download Page 187

95

4

4

Features of your vehicle

Lighting

Lighting

This vehicle is equipped with a vari

-

ety of lights to illuminate the inte

-

rior and exterior of the vehicle.

CAUTION

To prevent the battery from being 
discharged, do not leave the head

-

light and interior light on for a pro

-

longed time whilst the engine is not 
running.

Battery saver function

The purpose of this feature is to 
prevent the battery from being 
discharged if the lights are left in 
the ON position. The system auto

-

matically shuts off the parking 
lights after the engine is off and 
the driver's door is opened.
However, the position lamps stay 
ON even when the driver-side 
door is opened if the light switch is 
operated after the engine is 
turned off. 
If necessary, to keep the lamps on 
turn the position lamps OFF and 
ON again using the headlamp 
switch on the steering column 
after the engine is turned off.

Daytime Running Light (DRL) (if 
equipped)

The Daytime Running Light (DRL) 
can make it easier for others to see 
the front of your vehicle during the 
day.

The DRL can be helpful in many dif

-

ferent driving conditions, and it is 
especially helpful after dawn and 
before sunset.

The DRL will turn the dedicated 
lamp OFF when:
䳜 The headlight switch is on.
䳜 The vehicle is off.
䳜 The front fog light is on.
䳜 Engaging the Parking Brake.

Traffic Change (For Europe)

The low beam light distribution is 
asymmetric. If you go abroad to a 
country with opposite traffic direc

-

tion, this asymmetric part will daz

-

zle oncoming car driver. To prevent 
dazzle, ECE regulation demand sev

-

eral technical solutions (ex. auto

-

matic change system, adhesive 
sheet, down aiming). This head

-

lamps are designed not to dazzle 
opposite drivers. So, you need not 
change your headlamps in a country 
with opposite traffic direction.

Summary of Contents for SELTOS

























































































































































































































































































Reviews:

No comments