Kia Rio 2022, Owner'S Manual, Page: 554 / 602

Maintenance
96 8
Light bulbs
socket into the assembly and turn the
socket clockwise.
7. Install the service cover by putting it
into the service hole.
Rear fog lamp (Bulb type) bulb
replacement
1. Open the tailgate.
2. Remove the service cover.
3. Remove the socket from the assembly
by turning the socket counterclock
-
wise until the tabs on the socket align
with the slots on the assembly.
4. Remove the bulb from the socket by
pressing it in and rotating it counter
-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
5. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
6. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
7. Install the service cover by putting it
into the service hole.
Rear fog lamp (LED type) bulb
replacement
If the rear fog lamp (LED) (1), does not
operate, have your vehicle checked by a
professional workshop. Kia recommends
to visit an authorised Kia dealer/service
partner. The LED lamps cannot be
replaced as a single unit because it is an
integrated unit. The LED lamps has to be
replaced with the unit. A skilled techni
-
cian should check or repair the rear fog
OYB070065L
OYB070068L
OYB070162L