Kia Rio 2022, Owner'S Manual, Page: 551 / 602

93
8
8
Maintenance Light bulbs
8. Reinstall the lamp assembly to the
body of the vehicle.
Stop and tail lamp (Bulb type)
bulb replacement
1. Open the trunk lid.
2. Loosen the light assembly retaining
screws with a cross-tip screwdriver.
3. Remove the rear combination lamp
assembly from the body of the vehi
-
cle.
4. Disconnect the rear combination lamp
connector.
5. Remove the socket from the assembly
by turning the socket counterclock
-
wise until the tabs on the socket align
with the slots on the assembly.
6. Remove the bulb from the socket by
pressing it in and rotating it counter
-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
7. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
8. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
9. Install the rear combination lamp
assembly to the body of the vehicle.
Rear turn signal lamp (Bulb type)
bulb replacement
1. Open the trunk lid.
2. Loosen the light assembly retaining
screws with a cross-tip screwdriver.
OYB070060L
OYB070061L
OYB070062L
OYB070060L