Kia Rio 2022, Owner'S Manual, Page: 434 / 602

What to do in an emergency
8 7
Tyre Pressure Monitoring System (TPMS)
Tyre Pressure Monitoring Sys
-
tem (TPMS) (if equipped)
(1) Low tyre pressure telltale
(2) TPMS SET button
System Overview
The tyre pressure monitoring system
(TPMS) senses change in radius of the
tyre. If the tyre pressure decreases
below the recommended pressure, the
system warning light will be illuminated.
For the system to function properly, you
should reset the system by pushing the
TPMS SET button according to the accu
-
rate procedure and store the current
tyre pressure.
The warning light will appear on the
cluster when one or more of your tyres is
under-inflated after the TPMS is set.
The warning light will also appear to
warn the driver of system malfunction.
Please refer to the above image (1) for
further information.
TPMS reset procedure
You should reset TPMS in below situa
-
tions.
僅 After repairing or replacing tyres (or
wheels)
僅 After rotating tyres
僅 After adjusting tyre pressure
僅 When the low tyre pressure indicator
illuminates
僅 After replacing suspension or ABS
system
1. Park the vehicle on a level, firm sur
-
face.
2. Inflate the tyres to the proper pres
-
sure as indicated on the vehicle's
placard or tyre inflation pressure label
located on the driver's side centre pil
-
lar outer panel.
3. Starting the engine, press and hold
the TPMS SET button for about three
seconds to reset TPMS. The reset pro
-
cess completes automatically.
4. Then check that the low tyre pressure
indicator turns off after blinking for
four seconds. In case of supervision
cluster, check that "Tyre pressure
OYB061019R
OYB061018R
OYB062018R