Home
/
Kia
/
Rio 2018
/
Owner'S Manual

Kia Rio 2018, Owner'S Manual, Page: 281 / 490

Share

Page: 281 / 490

Kia Rio 2018 Owner'S Manual Download Page 281

6 33

Driving your vehicle

Hill-start assist control (HAC)

Hill start Assist Control is a comfort
function. The main intent is to pre-
vent the vehicle from rolling back-
wards while driving uphill on an
inclined surface. HAC holds the brak-
ing pressure builtup by driver during
stopping procedure for 2 seconds
after releasing brake pedal.
During the pressure-hold period, the
driver has enough time to press the
accelerator pedal to drive off.
The braking pressure is reduced as
soon as the system detects the dri-
ver’s intention to drive off.

• The HAC does not operate when

the transaxle shift lever is in the P
(Park) or N (Neutral) position.

• The HAC activates even though

the ESC is off but it does not acti-
vate when the ESC has malfunc-
tioned.

WARNING

- Maintaining

Brake Pressure on Incline

HAC does not replace the need
to apply brakes while stopped on
an incline. While stopped, make
sure you maintain brake pres-
sure sufficient to prevent your
vehicle from rolling backward
and causing an accident. Don’t
release the brake pedal until you
are ready to accelerate forward.

WARNING

- Operating

ESC

Never press the ESC OFF but-
ton while ESC is operating.
If the ESC is turned off while
ESC is operating, the vehicle
may go out of control.

«
...
279
280
281
282
283
...
»

Summary of Contents for Rio 2018











































































































































































































































































































































































































































































































Reviews:

No comments