manualshive.com logo in svg

Kia Rio 2018, Owner'S Manual, Page: 132 / 490

Share
Download
Kia Rio 2018 Owner'S Manual Download Page 132

Features of your vehicle

60

4

Over view

LCD windows show the following var-
ious information to drivers.
- Trip information
- LCD modes
- Warning messages

Trip information (Trip computer)

The trip computer is a microcomput-
er-controlled driver information sys-
tem that displays information related
to driving.

✽

✽

NOTICE

Some driving information stored in
the trip computer (for example
Average Vehicle Speed) resets if the
battery is disconnected.

Trip Modes 

- For Type A cluster

LCD WINDOWS (IF EQUIPPED)

OSC046119

To change the trip mode, press the
TRIP button.

• Tripmeter [A]
• Elapsed Time [A]
• Average Vehicle Speed [A]

TRIP A

• Tripmeter [B]
• Elapsed Time [B]
• Average Vehicle Speed [B]

TRIP B

• Distance To Empty
• Average Fuel Economy
• Instant Fuel Economy

FUEL ECONOMY

• Service reminder

Service

• Service reminder

Service

• Speed On/Off

Speed

Summary of Contents for Rio 2018











































































































































































































































































































































































































































































































Reviews:

No comments