Kia Quoris 2014, Manual, Page: 28 / 486

3 13
Safety features of your vehicle
For power type
2. Raise it as far as it can go by
pulling the switch up (3).
3. Put the headrest poles (4) into the
holes and then pull the switch
down (5) until the headrest moves
to the lowest position.
4. To install the headrest securely,
move the headrest up and down 2
or 3 times by pulling the switch up
and down.
5. Recline the seatback (7) with the
recliner control switch (6).
6. Adjust the headrest to the appro-
priate height.
Electronic active headrest
The electronic active headrest is
designed to trigger the headrest for-
ward and upward when impact sensor
detects a rear impact. This helps to
prevent the driver's and front passen-
ger’s heads from moving backward
and thus helps minimize neck injuries.
WARNING
If you don't install the headrest
securely, the active headrest
may not operate normally. When
reinstalling the headrest, install
it securely as procedures.
OBH038069
WARNING
Do not operate the vehicle with
the headrests removed as
severe injury to the occupants
may occur in the event of an
accident. Headrests may pro-
vide protection against neck
injuries when properly adjusted.
WARNING
Make sure the headrest locks in
position after adjusting it to
properly protect the occupants.
CAUTION
The active headrest is a safety
device to reduce injuries from a
rear impact. Do not hit or pull
the headrest intentionally.
OKH033102