Kia Picanto, Manual

Page: 616 / 680

Maintenance
100 8
Light bulbs
Push the socket into the assem
-
bly and turn the socket clockwise.
8. Connect the daytime running
lamp connector.
9. Install the front bumper side
assembly to the body of the vehi
-
cle.
Side repeater lamp (LED type) bulb
Replacement
If the side repeater lamp (LED) (1)
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an
authorised Kia dealer/service part
-
ner.
The LED lamps cannot be replaced
as a single unit because it is an inte
-
grated unit. The LED lamps has to
be replaced with the unit.
A skilled technician should check or
repair side repeater lamp (LED), for
it may damage related parts of the
vehicle.
Side repeater lamp (Bulb type) bulb
Replacement
1. Remove the lamp assembly from
the vehicle by prying the lens and
pulling the assembly out.
2. Disconnect the bulb electrical con
-
nector.
3. Separate the socket and the lens
parts by turning the socket coun
-
terclockwise until the tabs on the
socket align with the slots on the
lens part.
4. Remove the bulb by pulling it
straight out.
5. Insert a new bulb in the socket.
6. Reassemble the socket and the
lens part.
7. Connect the bulb electrical con
-
nector.
8. Reinstall the lamp assembly to
the body of the vehicle.
OYB076047
OYB070059L