Kia PICANTO 2023, Manual, Page: 522 / 570

Maintenance
100 8
Light bulbs
6. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
7. Install the socket into the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
8. Reinstall the lamp assembly to the
body of the vehicle.
Rear fog lamp (LED type) bulb
replacement (Type B, C)
Type B
Type C
If the rear fog lamp (LED type) (1) does
not operate, have your vehicle checked
by a professional workshop. Kia recom
-
mends to visit an authorised Kia dealer/
service partner.The LED lamp cannot be
replaced as a single component because
it is an integrated unit. The LED lamp has
to be replaced with the unit.A skilled
technician should check or repair the
rear fog lamp (LED type), for it may
damage related parts of the vehicle.
License plate lamp (Bulb type)
bulb replacement
1. Using a flat-blade screwdriver, gently
pry the lens cover from lamp housing.
2. Remove the socket from the assembly
by turning the socket counterclock
-
wise until the tabs on the socket align
with the slots on the assembly.
3. Remove the bulb from bulb-socket by
pulling it out.
4. Insert a new bulb by inserting it into
the bulb-socket.
5. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
6. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
OJA070144L
OJA070145L
OJA070063