Kia PICANTO 2023, Manual, Page: 515 / 570

93
8
8
Maintenance Light bulbs
Front fog lamp (Bulb type) bulb
replacement (Type A)
Type A
1. Disconnect the negative (-) battery
terminal.
2. Disconnect the side after loosening
the front bumper sides screws and
clips.
3. Disconnect the front fog lamp con
-
nector.
4. Remove the socket from the assembly
by turning the socket counterclock
-
wise until the tabs on the socket align
with the slots on the assembly.
5. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
6. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
7. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
8. Connect the front fog lamp connector.
9. Install the front bumper side assembly
to the body of the vehicle.
Front fog lamp (Bulb type) bulb
replacement (Type B, C)
Type B
Type C
1. Disconnect the negative (-) battery
terminal.
2. Remove the engine under cover.
3. Disconnect the front fog lamp con
-
nector.
4. Remove the socket from the assembly
by turning the socket counterclock
-
wise until the tabs on the socket align
with the slots on the assembly.
5. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
OJA076037
OJA070121
OJA070122