Kia PICANTO 2023, Manual, Page: 328 / 570

Driving your vehicle
82 6
Blind-Spot Collision-Avoidance Assist (BCA)
僅 Do not apply license plate frame or
objects, such as a bumper sticker, film
or a bumper guard near the rear cor
-
ner radar.
僅 Blind-Spot Collision-Avoidance Assist
may not work properly if the bumper
has been replaced, or the surround
-
ings of the rear corner radar has been
damaged or paint has been applied. If
a trailer, carrier, etc. is installed, it may
adversely affect the performance of
the rear corner radar or it may not
operate.
CAUTION
For more details on the precautions of
the front view camera, refer to "Forward
Collision-Avoidance Assist (FCA) (Sen
-
sor fusion) (if equipped)" on page 6-55.
Blind-Spot Collision-Avoidance
Assist settings
Blind-Spot Safety
With the ignition switch or ENGINE
START/STOP button in the ON position,
select or deselect ‘Driver Assistance →
Blind-Spot Safety’ from the User Set
-
tings menu to set whether or not to use
each function.
僅 If ‘Active assist’ is selected, Blind-Spot
Collision-Avoidance Assist will warn
the driver with a warning message, an
audible warning and braking assist
will be applied depending on the colli
-
sion risk levels.
僅 If ‘Warning only’ is selected, Blind-
Spot Collision-Avoidance Assist will
warn the driver with a warning mes
-
sage, an audible warning depending
on the collision risk levels. Braking will
not be assisted.
僅 If ‘Off’ is selected, Blind-Spot Colli
-
sion-Avoidance Assist will turn off.
When the engine is restarted with Blind-
Spot Collision-Avoidance Assist off, the
‘Blind-spot safety system is Off‘ mes
-
sage will appear on the cluster.
If you change the setting from ‘Off’ to
‘Active assist’ or ‘Warning only’, the
warning light on the outside rearview
mirror will blink for three seconds.
In addition, if the engine is turned on,
when Blind-Spot Collision-Avoidance
Assist is set to ‘Active assist’ or ‘Warning
only’, the warning light on the outside
rearview mirror will blink for three sec
-
onds.
OJA050144R
OJA050083R