Kia PICANTO 2023 Manual Download Page 324

Page: 324 / 570

Driving your vehicle

Blind-Spot Collision Warning (BCW)

僅 A motorcycle or bicycle is detected
僅 A vehicle such as a flat trailer is

detected

僅 A big vehicle such as a bus or truck is

detected

僅 A moving obstacle such as a pedes

trian, animal, shopping cart or a baby
stroller is detected

僅 A vehicle with low height such as a

sports car is detected

WARNING

Driving on a curved road

Blind-Spot Safety function may not
operate properly when driving on a
curved road. Blind-Spot Collision Warn

ing may not detect the vehicle in the
next lane.
Always pay attention to road and driving
conditions whilst driving.

Blind-Spot Safety function may not
operate properly when driving on the
curved road. Blind-Spot Collision Warn

ing may recognize the vehicle in the
same lane.
Always pay attention to road and driving
conditions whilst driving.

Driving where the road is merging/
dividing

Blind-Spot Safety function may not
operate properly when driving where the
road merges or divides. Blind-Spot Colli

sion Warning may not detect the vehicle
in the next lane.
Always pay attention to road and driving
conditions whilst driving.

OJA052110

OJA052111

OJA052112

Summary of Contents for PICANTO 2023



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PICANTO 2023

Reviews:

Kia PICANTO 2023, Manual, Page: 324 / 570

Search results

Summary of Contents for PICANTO 2023

Reviews: