
Driving your vehicle
88
6
Conditions that cause missed
warnings and false warnings:
• The lane is not visible due to snow,
rain, debris, puddles or other envi-
ronmental conditions.
• The brightness outside changes
suddenly such as when
entering/exiting a tunnel.
• The headlights are off at night or in
a tunnel.
• The color of the lane marking from
the road is difficult to distinguish.
• Driving on a steep grade or a
curve.
• Light such as street lights, sunlight
or oncoming vehicle lights reflect
off of water on the road.
• The lens or windshield is stained
with foreign matters.
• The sensor cannot detect the lane
because of fog, heavy rain or
heavy snow.
• The surrounding of the inside rear
view mirror temperature is high
due to a direct ray of light.
• The lane is very wide or narrow.
• The lane line is damaged or indis-
tinct.
• The windshield is fogged up by
humidity.
• Objects in the median or along the
side of the road cast shadows over
the lane markings
• The sensor cannot distinguish the
lane from the road due to the
dust/dirt.
• There are other markings similar to
lane lines.
• There are lane boundaries instead
of markings.
• The vehicle ahead is very close,
obscuring the view of the lane
markings, or the vehicle ahead is
driving over the lane markings.
• The vehicle vibrates heavily due to
poor road conditions.
• The lane number increases or
decreases or the lane line are
crossing.
• Putting something on the dash-
board.
• Driving with the sun in front of you.
• Driving in areas under construc-
tion.
• Lanes are marked by more than
two sets of lines.
• The windshield is fogged by humid
air in the vehicle.
• Do not turn the steering wheel sud-
denly, when the LDWS warns you
that your vehicle is leaving the lane.
This device complies with
Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following
two conditions:
(1) This device may not cause inter-
ference, and
(2) This device must accept any
interference, including interfer-
ence that may cause undesired
operation of the device.