Kia Optima 2017, Owner'S Manual, Page: 662 / 776

FUSES
Blade type
Cartridge type
Multifuse
BFT
OJF075021
❈
Left side: Normal
Right side: blown
A vehicle’s electrical system is protec‐
ted from electrical overload damage by
fuses.
This vehicle has 2 (or 3) fuse panels,
one located in the driver’s side panel
bolster, the others in the engine com‐
partment near the battery.
If any of your vehicle’s lights, accesso‐
ries, or controls do not work, check the
appropriate circuit fuse. If a fuse has
blown, the element inside the fuse will
melt.
If the electrical system does not work,
first check the driver’s side fuse panel.
Before replacing a blown fuse, discon‐
nect the negative battery cable.
Always replace a blown fuse with one
of the same rating.
If the replacement fuse blows, this indi‐
cates an electrical problem. Avoid using
the system involved and immediately
consult an authorized Kia dealer.
Three kinds of fuses are used: blade
type for lower amperage rating, car‐
tridge type, and multi fuse for higher
amperage ratings.
WARNING
n Fuse replacement
• Never replace a fuse with anything
but another fuse of the same rat‐
ing.
• A higher capacity fuse could cause
damage and possibly a fire.
• Never install a wire or aluminum
foil instead of the proper fuse
even as a temporary repair. It may
cause extensive wiring damage
and a possible fire.
• Do not arbitrarily modify or add-
on electric wiring of the vehicle.
CAUTION
Do not use a screwdriver or any oth‐
er metal object to remove fuses be‐
cause it may cause a short circuit
and damage the system.
Maintenance
8-76