Kia niro ev 2020, Features & Functions Manual, Page: 31 / 54

29
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS . *IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
(Type B shown)
(Distances are approximate and vary depending on
vehicle speed)
STEERING WHEEL CONTROLS
Smart Cruise Control
with Stop & Go Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website . Refer to page 2
for more information .
www.youtube.com/KiaFeatureVideos
QR CODE
Smart Cruise Control
canceled
F
E
H
172ft 130ft
82ft
106ft
C
A
B
D
G
Smart Cruise Control (SCC) with Stop & Go *
†7,20
The Smart Cruise Control (SCC) system allows you to set the vehicle to maintain a speed
and predetermined distance from vehicles detected ahead by automatically adjusting the
driving speed as needed . When traffic is encountered, the vehicle may be slowed to help
maintain the set distance from vehicles detected ahead without the driver depressing
the brake pedal .
With the SCC on and activated, the vehicle-to-vehicle distance set, and the system
detects a vehicle slowing or stopping, the system can bring the vehicle to a complete
stop . When the vehicle ahead starts to move forward, the SCC system re-engages . If the
vehicle ahead stops for more than 3 seconds, the accelerator pedal or the RES+ button
must be pressed to start moving the vehicle .
To set/adjust SCC speed:
•
Push the CRUISE button A to turn system ON . The CRUISE indicator will illuminate on
the instrument cluster
•
Accelerate/decelerate to the desired speed
•
Press button B down to set the speed . The SET indicator light will illuminate . The set
speed and vehicle-to-vehicle distance will illuminate on the LCD screen
•
Press the RES+/SET- button B up/down to increase/decrease the set speed
To adjust the vehicle-to-vehicle distance setting C : Press the SCC button D on
the steering wheel . The images on the LCD screen E and the Instrument Cluster F
will change when scrolling through the settings . Each time the button is pressed, the
vehicle-to-vehicle distance changes .
To cancel SCC operation:
Press the CANCEL button G or press the brake pedal .
The LCD screen will display a message that the SCC operation is canceled H .
To turn SCC system OFF:
Press the CRUISE button A . The CRUISE indicator on the
instrument cluster will turn OFF .
The SCC system is a supplemental
system and is not a substitute for
safe driving. It is the responsibility of
the driver to always check the speed
and distance to the vehicle ahead.
Images are for illustrative purposes
only and may vary on actual vehicle.