Kia niro 2023, Owner'S Manual, Page: 338 / 440

What to do in an emergency
24 7
If you have a flat tire (with Tire Mobility Kit)
Using the Tire Mobility Kit
Operation
1. Shake the sealant bottle.
2. Connect the filling hose onto the con
-
nector of the sealant bottle. (A)
Remove the sealant bottle cap and
sealant bottle holder cap and connect
the bottle onto the sealant bottle
holder. (B)
3. Make sure the compressor valve on
the filling hose is locked.
4. Unscrew the valve cap and screw the
filling hose onto the tire valve.
5. Make sure the compressor is turned
off.
6. Connect the power outlet connector.
7. Start the vehicle.
8. Turn the compressor on and let it run
for approximately 5~7 minutes to fill
the sealant up to the proper pressure.
9. Turn the compressor off.
10.Detach the filling hose from the tire
valve.
Distributing the sealant
Operation
僅 Immediately drive approximately
7~10 km (4~6 miles, or approximately
10 minutes) to distribute the tire seal
-
ant evenly.
WARNING
僅 Do not leave your vehicle running in a
poorly ventilated area for extended
periods of time. Carbon monoxide
poisoning and suffocation can occur.
僅 If the tire pressure is below 26 psi(180
kPa), do not drive the vehicle. The tire
may cause accident.
ODEPV062008
ODEPV062009
ODEPPH062012L
ODEPPH062013L
ODEPPH062014L_2