Home
/
Kia
/
Niro 2017
/
Owner'S Manual

Kia Niro 2017, Owner'S Manual, Page: 341 / 552

Share

Page: 341 / 552

Kia Niro 2017 Owner'S Manual Download Page 341

6 53

Driving your vehicle

3. Move the lever down (to SET-),

and release it at the desired
speed. The set speed and vehicle
to vehicle distance on the LDC
screen will illuminate.

4. Release the accelerator pedal.

The desired speed will automati-
cally be maintained.

If there is a vehicle in front of you, the
speed may decrease to maintain the
distance to the vehicle ahead.
On a steep grade, the vehicle may
slow down or speed up slightly while
going uphill or downhill.

To increase cruise control set
speed:

Follow either of these procedures:
• Move the lever up (to RES+), and

hold it. Your vehicle set speed will
increase by 5 mph (10 km/h).
Release the lever at the speed you
want.

• Move the lever up (to RES+), and

release it immediately. The cruising
speed will increase by 1 mph (1.0
km/h) each time you move the
lever up (to RES+) in this manner.

• SCC will operate to a maximum

setting of 110 mph (180 km/h).
However all local speed limit laws
must be followed.

ODE056041CN

ODE056040CN

«
...
339
340
341
342
343
...
»

Summary of Contents for Niro 2017









































































































































































































































































































































































































































































































































































Reviews:

No comments