manualshive.com logo in svg

Kia Niro 2017, Owner'S Manual, Page: 337 / 552

Share
Download
Kia Niro 2017 Owner'S Manual Download Page 337

6 49

Driving your vehicle

To decrease the cruising
speed:

Follow either of these procedures:
• Move the lever down (to SET-) and

hold it. Your vehicle will gradually
slow down. Release the lever at the
speed you want to maintain.

• Move the lever down (to SET-) and

release it immediately. The cruising
speed will decrease by 1.0 mph (2
km/h) each time the lever is operat-
ed in this manner.

To temporarily accelerate with
the cruise control on:

If you want to speed up temporarily
when the cruise control is on,
depress the accelerator pedal.
Increased speed will not interfere
with the cruise control operation or
change the set speed.
To return to the set speed, take your
foot off the accelerator.

To cancel cruise control, do
one of the following:

• Depress the brake pedal.
• Shift into N (Neutral) with a dual

clutch transmission.

• Press the CANCEL switch.
• Decrease the vehicle speed lower

than the memory speed by 12 mph
(20 km/h).

• Decrease the vehicle speed to less

than approximately 15 mph (25
km/h).

OJF055041

OJF055039

Summary of Contents for Niro 2017









































































































































































































































































































































































































































































































































































Reviews:

No comments